sheet metal stamping parts manufacturing -Syndex Technical

Product

Some of our main products are metal inserts, springs, and contacts. Majority of our pressed parts are stamped progressively, and we have in-process inspections to ensure the critical dimensions are met per the specification. The product may require deburring and/or washing before they go into QC phase. Since we have already executed in-process inspection, during the QC stage, we only perform sampling inspection for critical dimensions, however, we do 100% visual check on exterior appearance.

Tool Designing and Making

A good tool/die helps reduce the overall cost of manufacturing, increases production rate, and maintains product quality/consistency. We work with professional and experienced toolmakers, and we have an in-house tool room for simple modifications or adjustments.

Stamping

Also called pressing, it involves placing flat sheet metal, in either coil or blank form, into a stamping press. In the press, a tool/die surface form the metal into the desired shape. Punching, blanking, bending, coining, embossing, and flanging are all stamping techniques used to shape the metal.There are progressive stamping and traditional pressing, most of our products are manufactured using progressive stamping method.

Grinding and Deburring

Techniques used to create smooth metal surface after stamping. This is an important step to prevent users getting injured from the sharp edges.

Tapping

The process of cutting the threads using a tap.

Other secondary operations such as Passivation, Metal Plating, and Heat Treating, etc. are also available, send us your inquiry today.